+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] SPX-5 computer compatible with control ST6001+ (/showthread.php?tid=8676)
[CA11] SPX-5 computer compatible with control ST6001+ - Johnsen - 06-26-19 04:31 AM
Hi
Can I use control head ST6001+ along with a SPX-5 computer and a wheel drive?
regards
John
RE: [CA11] SPX-5 computer compatible with control ST6001+ - Chuck - Raymarine - Moderator - 06-26-19 02:59 PM
Welcome to the Raymarine Forum John,
Indeed, a ST600x, ST700x, or ST800x autopilot control head may be used with SPX autopilot course computers. When using one of these autopilot control heads, the autopilot control head must be directly interfaced to and powered by the autopilot course computer's SeaTalk port.
RE: [CA11] SPX-5 computer compatible with control ST6001+ - Johnsen - 06-27-19 06:43 AM
Thank you for good support!
Regards
John
RE: [CA11] SPX-5 computer compatible with control ST6001+ - Chuck - Raymarine - Moderator - 06-27-19 09:06 AM
You're welcome.