[LW] [LW11] Unable MFD e7 to send GPS position to VHF - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [LW] [LW11] Unable MFD e7 to send GPS position to VHF (/showthread.php?tid=8712) |
[LW11] Unable MFD e7 to send GPS position to VHF - Arsouin - 06-28-19 04:47 AM Hi, My e7 (n°62354 0130 508) is connected to the input of the VHF RT550 via NMEA 0183. When I turn on the devices, the VHF doesnt receive the GPS position. Diagnostic screen shows that GPS position sentences are well sent in the buffer of NMEA 0183 port 1. Then, I change the NMEA setting : Home/ Setup/ NMEA/ NMEA input port 1 >> "4800" I come back to home sceen and, I change again NMEA setting : Home/ Setup/ NMEA/ NMEA input port 1 >> "AIS 38400" And I come back to home screen... and then, VHF receives GPS position !!! I updated the e7 software (R19-v19.03a_v19.00p_v1.20G_v1.20n_v1.20r_v1.20j_v17.03m-ISO), but no improvement. Many thx for your help. regards Jean-Pierre RE: [LW11] Unable MFD e7 to send GPS position to VHF - Louise - Raymarine - Moderator - 07-03-19 05:20 AM Dear Arsouin, Is your RT550 VHF the AIS version? What colour NMEA cables are you connected to from the e7 to the RT550 AIS? Many Thanks Louise |