+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom 9 problem tracking (/showthread.php?tid=8747)
[CA11] Axiom 9 problem tracking - Tleese - 07-02-19 06:41 AM
I just recently purchased a new axiom 9 with newest update. It was installed by a dealer. It won’t track my downrigger [censored] I’m not. sure this is normal or not any help would be great
RE: [CA11] Axiom 9 problem tracking - Chuck - Raymarine - Moderator - 07-16-19 03:17 PM
Welcome to the Raymarine Forum Tleese ,
Please excuse this late response. There were many odd issues related to the LH3 v3.8.x and v3.9.x software, many of which, including reduced sonar sensitivity, were corrected through execution of the Power ON Factory Reset procedure. That said, LH3 v3.10.39 was released today. It is recommended that this software be installed on the system's MFDs and that the Power ON Factory Reset procedure then be executed to correct the reported behavior.