+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: LightHouse Charts (/forumdisplay.php?fid=118)
+--- Thread: [LW] [LW11] LH3 Distance and Bearing (/showthread.php?tid=8754)
[LW11] LH3 Distance and Bearing - watsala - 07-02-19 01:44 PM
What is the best way to measure a distance and bearing between two points? (And the current location is neither).
Thanks
W
RE: [LW11] LH3 Distance and Bearing - Louise - Raymarine - Moderator - 07-05-19 10:45 AM
Dear watsala,
Thank you for your post.
Currently the ruler feature is not available in Lighthouse 3, however it is due to come out with a software update soon.
A suggestion for measuring the distances between 2 points would be to create a route with 2 waypoints. A waypoint and point 1 and a waypoint at point 2, this will give you the distance.
Many Thanks
Louise
RE: [LW11] LH3 Distance and Bearing - watsala - 07-14-19 03:54 AM
Thanks - this would indeed be a handy feature in the event of say a GPS failure and you need to use the plotter like a paper chart, and also for route planning.
Thanks
W
RE: [LW11] LH3 Distance and Bearing - Louise - Raymarine - Moderator - 07-17-19 11:14 AM
Dear watsala,
Thank you for your feedback.
Many Thanks
Louise