[TG] Evolution EV-1 Roll Calibration - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: [TG] Evolution EV-1 Roll Calibration (/showthread.php?tid=8837) |
Evolution EV-1 Roll Calibration - kdammen - 07-10-19 07:57 AM Do we have a way to calibrate roll on the Evolution EV-1. Mine is off by a few degrees and I'd rather not manually shim the EV-1 if I can just compensate by calibration. RE: Evolution EV-1 Roll Calibration - Tom - Raymarine - Moderator - 07-17-19 01:53 AM Hello kdammen, There's no calibration for the EV's roll data, but I've personally not come across a system where that was needed. I don't have a spirit level in the office but my old test EV agrees within <1 degree with the sensor in my phone, for example. How far off is yours - a few degrees sounds like a lot - and what have you used to verify that what it's mounted level now? In my experience it's hard to find a truly horizontal reference or surface below-decks. Regards, Tom |