+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] How to change between TWS / AWS on Chart App Wind Vector (/showthread.php?tid=8844)
[CA11] How to change between TWS / AWS on Chart App Wind Vector - Dan_Y - 07-10-19 08:15 PM
Somewhere in a LH3.X upgrade I cannot seem to find how to toggle between TWS and AWS when I select the Wind vector from the Vessel Details pop over menu in LH 3.9. I can toggle between TWS and AWS on the I60 but the Axiom 9 seems to only display TWS vector. BTW, LH3.9 is really really good.
Thank You
Dan
RE: [CA11] How to change between TWS / AWS on Chart App Wind Vector - Chuck - Raymarine - Moderator - 07-17-19 10:44 AM
Welcome to the Raymarine Forum Dan,
The wind vector displayed within the Chart application cannot be configured to display an apparent wind vector. The Wind Vector feature is intended to display True Wind.
RE: [CA11] How to change between TWS / AWS on Chart App Wind Vector - Dan_Y - 07-21-19 07:03 PM
Thanks Chuck.
After thinking about it while using the display with the Heading vector, COG vector and the tide vector, the TWS vector makes the most sense.
Dan
RE: [CA11] How to change between TWS / AWS on Chart App Wind Vector - Chuck - Raymarine - Moderator - 07-22-19 09:50 AM
You're welcome.