+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Send position to nmea0183 vhf (/showthread.php?tid=8911)
[CA11] Send position to nmea0183 vhf - Ktisdall - 07-16-19 09:07 PM
I have a fully working seatalkng network with an axiom 9 mfd. I inserted a seatalk1 / seatalkng convertor near the vhf and used a bare end spur cable to connect the vhf “listen†or RX connection. When I connect the spur to the converter, the diagnostic light goes from indicating ‘healthy’ to “on†indicating low voltage.
What is the correct way to make this interface work?
—Kevin
RE: [CA11] Send position to nmea0183 vhf - Chuck - Raymarine - Moderator - 07-22-19 01:34 PM
Welcome to the Raymarine Forum Kevin,
Please click here to view a FAQ addressing this subject.