+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: [CA] [CA11] Raymarine T-403 (/showthread.php?tid=8972)
[CA11] Raymarine T-403 - Kevin - 07-22-19 08:11 AM
Hello,
I was wondering if a Raymarine branded T-403 (pn: E32128) that is currently installed in a Raymarine system with E-Wide MFDs will work with a Garmin 8600 series MFD.
There is no JCU and control of the camera is through the E-Wide.
I know Garmin would require the PoE isolator and I've installed Flir-branded cameras to Garmin but I wasn't sure if the Raymarine-branded cameras would work.
Thank you
RE: [CA11] Raymarine T-403 - Chuck - Raymarine - Moderator - 07-25-19 01:51 PM
Welcome to the Raymarine Forum Kevin,
Unfortunately, you will likely find that Garmin MFDs are not designed to support Raymarine branded thermal cameras. Although physically the same as the corresponding FLIR thermal cameras, Raymarine manufacturer encoding within the thermal camera's software will likely be rejected by the Garmin MFD.