+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Replacing an E-Series Widescreen MFD(s) with an a/c/e/eS/gS-Series MFD(s) (/showthread.php?tid=9)
Replacing an E-Series Widescreen MFD(s) with an a/c/e/eS/gS-Series MFD(s) - Chuck - Raymarine - Moderator - 12-15-15 02:42 PM
Replacing an E-Series Widescreen MFD(s) with an a/c/e/eS/gS-Series MFD(s)
Please note that the a/c/e/eS/gS-Series MFDs may not be installed within an Ethernet (SeaTalkhs/RayNet) network which additionally includes E-Series Widescreen MFDs. As such, should the current system presently feature more than one E-Series Widescreen MFD, then all of the E-Series Widescreen MFDs will need to be replaced with a/c/e/eS/gS-Series MFDs. Raymarine’s new a/c/e/eS/gS-Series MFDs may be mixed or matched in any combination within an Ethernet network of a/c/e/eS/gS-Series MFDs. The a/c/e/eS/gS-Series MFDs are designed to share all system data (except for NTSC/PAL video) with one another via the Ethernet network to which they will be interfaced.
MOUNTING: Raymarine offers the following adapter mounting kits (mounting plate, trim bezel, and sun cover) to replace flush mounted MFDs with c/e-Series MFDs:
• R70010 (C/E80 Classic MFDs)
• R70011 (C/E120 Classic MFDs)
• R70008 (C/E90W MFDs)
• R70009 (C/E120W MFDs)
Raymarine does not presently offer adapter mounting kits to replace flush mounted MFDs with an e7x MFD, e165 MFD, or and a/c/eS/gS-Series MFD.
POWER: The currently installed C/E-Series Widescreen MFD Power/Data/Video Input Cable will need to be replaced with the Power/NMEA 0183/Video Input Cable supplied with the a/c/e/eS/gS-Series MFD.
ETHERNET: Should the E-Series Widescreen MFD currently be interfaced to the system via a SeaTalkhs Cable, then the a/c/e/eS/gS-Series MFD replacing the E-Series Widescreen MFD may be adapted to use the currently installed SeaTalkhs Cable by using an A80160 SeaTalkhs (F) to RayNet (F) Adapter.
RADAR: Please click here to view a FAQ addressing how to add radar features to an a/c/e/eS/gS-Series MFD.
SEATALK: Please click here to view a FAQ addressing how to interface products having a SeaTalk interface to a SeaTalkng backbone, to which the Data Master a/c/e/eS/gS-Series MFD will also be interfaced.
EXTERNAL ALARM: Please click here to view a FAQ addressing how to add an alarm to the a/c/e/eS/gS-Series MFDs.
NMEA 0183: The NMEA 0183 leads of any NMEA 0183 devices which are presently interfaced to the E-Series Widescreen MFD's Power/Data/Video Input Cable will need to be disconnected from this cable and will instead be spliced to the corresponding leads of the a9x/a12x/c/e/eS/gS-Series MFD's Power/NMEA 0183/Video Input Cable. As the a6x and a7x MFDs do not feature a NMEA 0183 port, should the system not feature a larger a-Series MFD or a c/e/eS/gS-Series MFD, then it will instead be necessary to interface the NMEA 0183 device(s) to a powered and properly terminated SeaTalkng/NMEA 2000 backbone to which the a6x or a7x MFD has been interfaced as a spur. NMEA 0183 to SeaTalkng/NMEA 2000 data bridging devices (ex. Actisense NGW-1-STNG, Actisense NGW-1-AIS, etc.) are available from third parties to support interfacing NMEA 0183 devices to systems featuring a/c/e/eS/gS-Series MFDs.
SEATALKNG/NMEA 2000: Should the Data Master E-Series Widescreen MFD be interfaced as a spur to SeaTalkng/NMEA 2000 backbone, then the Data Master a/c/e/eS/gS-Series MFD may be interfaced to this backbone using the same SeaTalkng Spur Cable which had been interfaced to the E-Series Widescreen MFD’s SeaTalkng port. Should the SeaTalkng/NMEA 2000 backbone be constructed from third party NMEA 2000 networking components, then please note that Raymarine offers SeaTalkng to DeviceNet Male (A06046) and SeaTalkng to DeviceNet Female adapter cables (A06045) as well as Stripped End Spur cables (A06044) to support interfacing Raymarine products to third party NMEA 2000 networking components.
Video Input: The E-Series Widescreen MFDs support video input from up to two analog NTSC/PAL video sources. Raymarine’s c-Series MFDs, e7/e7D MFDs, and eS-Series MFDs support video input from one analog NTSC/PAL video source. Raymarine’s other e-Series MFDs and gS-Series MFDs support video input from up to two analog NTSC/PAL video sources (second via optional R70003 e-Series Accessory Video Cable). Should a compatible Raymarine or FLIR branded thermal camera need to be interfaced to the system, then it will need to be interfaced to the video input socket of the a/c/e/eS/gS-Series MFD’s Power/NMEA 0183/Video Input Cable. Other analog NTSC/PAL video input devices may be either interfaced to the video input socket of the a/c/e/eS/gS-Series MFD’s Power/NMEA 0183/Video Input Cable or to the video input socket of the R70003 e-Series Accessory Video Cable.
Video Output: The R70003 e-Series Accessory Video Cable may be used to interface a 9†and larger e-Series MFDs to a monitor or TV supporting 720P @ 60Hz. The gS-Series MFDs as well as the 9†and larger e-Series MFDs feature a HDMI port to permit the MFD to be interfaced to a monitor or TV to repeat the MFD’s screen image.
FISHFINDER(s): Please click here to view a FAQ addressing how to add fishfinder features to an a/c/e/eS/gS-Series MFD.
PROFESSIONAL INSTALLATION: While the replacement of this equipment is well within the capabilities of those familiar with marine electronics equipment installation, there will be some cable splicing and cable chasing required. Should this not be within your comfort zone or skills, then click here to locate a Certified Raymarine Installer in your area.
WAYPOINTS, ROUTES, AND TRACKS: Please click here to view a FAQ addressing this subject.
CARTOGRAPHY - Navionics cartography which has been programmed onto CF memory cards may not be used with a/c/e/eS/gS-Series MFDs and Axiom MFDs. Please click here to view a FAQ addressing this subject.
RAYFAQ#