Raymarine forum
[CA] [CA11] ST6000+ A/P Can't Calibrate Compass - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] ST6000+ A/P Can't Calibrate Compass (/showthread.php?tid=9083)



[CA11] ST6000+ A/P Can't Calibrate Compass - ritsim - 07-29-19 09:58 PM

Tried holding down the appropriate buttons on the st6000 and it will not go into calibration mode. Need to recalibrate the electronic compass. The previous owner incorrectly mounted it near steel. I have relocate the compass and need to calibrate it but cann not get to CAL mode.


RE: [CA11] ST6000+ A/P Can't Calibrate Compass - Chuck - Raymarine - Moderator - 08-01-19 01:50 PM

Welcome to the Raymarine Forum ritsim,

Calibration of a SmartPilot will not be accessible if the autopilot's SeaTrial Calibration Lock feature. Details concerning this feature and how it may be configure on/off may be found on page 47 of the SmartPilot Series Commissioning Guide.