Raymarine forum
[TG] [TG11] ST 1000+ displays - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] ST 1000+ displays (/showthread.php?tid=9099)

Pages: 1 2


RE: [TG11] ST 1000+ displays - Tom - Raymarine - Moderator - 12-03-19 08:13 PM

What is the actual problem now? If still 'No Pilot' as from a few posts ago then that implies a problem with your wired Seatalk network between the S100's base station and the ST1000+. There are limited diagnostics you can do with this with just 2 Seatalk devices and no specialist test tools, but a multimeter should show a fluctuating voltage somewhere between perhaps 3 and 8V (0-12V data pulses, being averaged by a slow-reading meter.)