+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Stability 3.10? (/showthread.php?tid=9169)
[CA11] Stability 3.10? - BernieK - 08-06-19 05:13 AM
I updated my Axiom -pro to 3.10 and have had a couple of issues.
They may have been present in the previous versions and I didn't encounter them. Only reason to update was for PDF reader.
In a previous update I did a factory reset & power cycle. I didn't do it for this one but I will do that as a first step.
The distances units and depth units DID NOT reset.
I have about 30 tracks from my E127 which i tried to imported and it fails on the last import. I did a quick tally up and altogether I have over 10,000 points.
So is the 10,000 points a total of all the tracks rather than each track?
RE: [CA11] Stability 3.10? - Chuck - Raymarine - Moderator - 08-07-19 02:27 PM
Welcome to the Raymarine Forum Bernie,
Q. So is the 10,000 points a total of all the tracks rather than each track?
A. This is the total per track. 15 saved routes plus an active route can total up to 160,000 track points.
RE: [CA11] Stability 3.10? - BernieK - 08-09-19 03:50 AM
Thanks for that. I will store excess routes on the SD card.
RE: [CA11] Stability 3.10? - Chuck - Raymarine - Moderator - 08-20-19 12:53 PM
You're welcome.