+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: Anchor camera (/showthread.php?tid=920)
Anchor camera - Jazevedo - 05-25-16 07:38 PM
Dear Forum members,
I Would like to instal a camera to check if may anchor is totally folded. I have an A98 MDF. Could someone give-me a tip what would be the best an ship solution for this.
Thanks in advance.
best
João
RE: Anchor camera - Chuck - Raymarine - Moderator - 05-26-16 07:20 AM
Welcome to the Raymarine Forum João,
The a9x MFDs are compatible with cameras having either a NTSC/PAL video interface (ex. CAM100) or Ethernet interface (ex. CAM210, CAM220, and CAM200IP). You may want to consider the CAM220 for your application.
RE: Anchor camera - Jazevedo - 06-23-16 07:27 PM
Dear chuck,
i Tried use a camera with a BNc conector, but there is only one conector in MFD for GA 150. how I connect the BNc to MFD? Do I need something else.
Best
RE: Anchor camera - Chuck - Raymarine - Moderator - 06-24-16 08:04 AM
João,
The GA150 actually connects to the MFD's TNC socket. The MFD's Power/NMEA 0183/Video Input Cable features a BNC connector to support interfacing camera producing a NTSC/PAL analog video signal.