+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW (/showthread.php?tid=9232)
[LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW - eric peterson - 08-12-19 06:31 AM
Hello,
I have recently upgraded my MFD to the Axiom Pro 12 rvx along with the 4kw HD Radome, RV 100 Realvision transom mount transducer, and the 1kw Airmar B164-20 d/t thruhull transducer. All are working except the Airmar 1 kw transducer. I am using a Raymarine A80496 adapter cable to connect the Airmar transducer to the 1 KW socket on the back of the Axiom. The axiom will not read or sense the 1 kw Airmar transducer. What am I doing wrong?
Regards - Eric
RE: [LW11] Axiom Pro rvx to Airmar B164 20 degree 1KW - Louise - Raymarine - Moderator - 08-23-19 05:48 AM
Dear eric peterson,
Thank you for your post.
Can you confirm the software revision you have installed in the Axiom Pro RVX. HOMESCREEN > SETTINGS - under the Axiom Pro description you will find your revision of software.
The 1kw Airmar B164-20 describes a family of transducers, can you confirm the Raymarine part number or what the transducer was previously connected to?
Many Thanks
Louise