Raymarine forum
[TG] [TG11] EVO with an S100/SmartController - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] EVO with an S100/SmartController (/showthread.php?tid=9240)



[TG11] EVO with an S100/SmartController - Niiiad - 08-12-19 01:58 PM

In the manual for the Ev-1 it lists the S100 and SmartController as compatible but has the note "repeat controller only" after them. What does repeat controller only mean? What functionality will either controller have on a modern Evo autopilot?

Thanks.


RE: EVO with an S100/SmartController - Tom - Raymarine - Moderator - 08-16-19 01:01 AM

Hello Niiiad,

It means that they can't be the sole pilot controller, there must be an p70/p70R or Axiom-class MFD in the system as well, but that's all.

Regards,
Tom


RE: [TG11] EVO with an S100/SmartController - Niiiad - 08-16-19 08:56 PM

Would an ES98 MFD work or does it have to be an Axiom?


RE: [TG11] EVO with an S100/SmartController - Tom - Raymarine - Moderator - 08-20-19 02:15 AM

Sorry, quite right: you can control a recent Raymarine pilot using a display running Lighthouse 2 or Lighthouse 3, including eS MFDs, without a dedicated fixed-mount pilot controller (so just an eS and Smartcontroller will be ok.) I personally always recommend a dedicated pilot display, but it's not required with those MFDs.

Regards,
Tom