+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Spur cable extender (/showthread.php?tid=9328)
[CA11] Spur cable extender - garybly - 08-20-19 12:19 PM
Can I use the backbone extender adapter to extend a spur cable. I need to connect my spur cable to my nmea backbone, I cannot find a cable with a female seatalk ng conntor to male mnea, does one exist?
RE: [CA11] Spur cable extender - Chuck - Raymarine - Moderator - 08-26-19 03:53 PM
Welcome to the Raymarine Forum Gary,
Raymarine does not offer SeaTalkng Spur Cable Extenders which would support joining a pair of SeaTalkng Spur Cables. However, Raymarine offers the A06802 SeaTalkng (M) to DeviceNet (F) adapter which would permit a spur cable to be extended using third cable having DeviceNet plugs of the correct gender on each end. Please note that the maximum supported total length of a spur is 6m. Should the device be located more than 6m from a spur socket within the backbone, then the backbone must be extended in the direction of the device to be added.