+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] e7 MFD screen gone red (/showthread.php?tid=9337)
[LW11] e7 MFD screen gone red - Marco@onyva - 08-21-19 03:19 AM
When I was sailing last week, I noticed a red glow on my e7 MFD, but initially thought it was my new sunglasses. They glow got worse though and I noticed that the background of the screen had gone orangy-red. The unit worked correctly though. Also on the chart, everything that would be normally black (i.e. vector lines, depth, etc) was now red. Restarted the unit, also with the power off at the panel first, nothing......
Is this a sign the screen is dying? Seems rather quick after 5 years.
I did notice in diagnostics the "system voltage" was 11,4 (and some other values of 11, something), which I do not know is normal? As the svs batteries were full and the boat voltage read 12,9V on the Victron battery monitor.
Any idea or suggestions are welcome. Thank you!
Marco
RE: [LW11] e7 MFD screen gone red - Louise - Raymarine - Moderator - 08-22-19 05:20 AM
Dear Marco@onyva,
Thank you for your post.
You will need to send this unit in for a screen repair, you can book this in online via our website here.
Many Thanks
Louise