+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] ST60+ Series NEMA 2000 Replacements (/showthread.php?tid=9521)
[CA11] ST60+ Series NEMA 2000 Replacements - tafika2 - 09-12-19 02:35 PM
I have a dual helm on my Jeanneau SO42DS. The system was upgraded last year wit Axiom 12 and Quantum radar, along with replacing the depth/speed i50 gauge (1) with a NEMA2000 adaptors. I want to upgrade the remaining instruments. The starboard side has a ST60+ WIND (NEMA183) gauge & a ST60+ TRIDATA Autohelm Series gauge. The port side is a slave (I believe) to the starboard side but without the i50 gauge. What are the replacement gauges I need?
RE: [CA11] ST60+ Series NEMA 2000 Replacements - Chuck - Raymarine - Moderator - 09-13-19 08:35 AM
Welcome to the Raymarine Forum tafika2,
Q1. depth/speed i50 gauge (1) with a NEMA2000 adaptors.
A1. Can I assume that the instrument which you have referenced is an i50 Tridata Instrument?
Q2. I want to upgrade the remaining instruments. The starboard side has a ST60+ WIND (NEMA183) gauge & a ST60+ TRIDATA Autohelm Series gauge.
A2. Please note that all ST60/ST60+ instruments except for the Graphic and Multi were only capable of supporting SeaTalk communications (i.e. no support for NMEA 0183 communications). If replacing a ST60+ Wind Instrument, an i60 Wind Instrument would be recommended. Similarly if replacing a ST60+ Tridata, then an i50 Tridata would be recommended. When transducer's have not been interfaced to instruments they will either automatically, or may be configured (via their menus) to function as repeaters.