+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: [LW] [LW11] RTSP stream URL for CAM210IP/220IP (/showthread.php?tid=9608)
[LW11] RTSP stream URL for CAM210IP/220IP - thomas.e - 09-27-19 03:07 AM
Hi forum,
In the manual for the CAM210IP (and 220IP) the network interface for RTSP is listed as port 554. However, unlike other FLIR cameras, the directory/path for which the video feed is served is not listed.
Typically it would be something like (see: https://www.flir.com/support-center/Instruments/vlc-media-player---display-and-record/)
rtsp://admin:password@ip:554/VIDEO
But there is no documentation available for what should come after 554/
I am able to "connect" using the following:
rtsp://ip:554/ and rtsp://ip
but there is feed available.
Any suggestions?
Best regards,
Thomas
RE: [LW11] RTSP stream URL for CAM210IP/220IP - Louise - Raymarine - Moderator - 10-02-19 09:26 AM
I have sent you a private message.
Many Thanks
Louise
RE: [LW11] RTSP stream URL for CAM210IP/220IP - ahpeterson - 10-13-19 10:08 AM
I have the same question, any guidance about what an RTSP stream URL looks like from a CAM220IP?
RE: [LW11] RTSP stream URL for CAM210IP/220IP - Louise - Raymarine - Moderator - 10-22-19 04:51 AM
I have responded to your email you sent to your support inbox.
Many Thanks
Louise
RE: [LW11] RTSP stream URL for CAM210IP/220IP - JPCavanagh - 01-09-20 09:10 AM
I have the same question for my new CAM220IP
RE: [LW11] RTSP stream URL for CAM210IP/220IP - Louise - Raymarine - Moderator - 01-16-20 10:51 AM
Private message sent.