Raymarine forum
[CA] [CA11] RD418D Cable - RayNet to e125/127 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [CA] [CA11] RD418D Cable - RayNet to e125/127 (/showthread.php?tid=9610)



[CA11] RD418D Cable - RayNet to e125/127 - SeekRest - 09-27-19 09:33 AM

I have a RD418d without a cable.
My MFDs are (2) e127’s connected via direct RayNet, with my data master connected My primary network is NMEA2k/SeaTalkng.
I do not have SeaTalkhs on the boat.

Can I utilize the A80229 cable direct to the open RayNet on my data master e127?


RE: [CA11] RD418D Cable - RayNet to e125/127 - Chuck - Raymarine - Moderator - 09-27-19 02:20 PM

Welcome to the Raymarine Forum SeekRest,

Q. Can I utilize the A80229 cable direct to the open RayNet on my data master e127?
A. Yes. The Digital Radar Cable which you have referenced may be interfaced to any of the currently unoccupied Ethernet Network (RayNet) sockets within any of the MFDs within the system.