+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Feedback from a/c/e/gs series owners on LH3 performance (/showthread.php?tid=9672)
[CA11] Feedback from a/c/e/gs series owners on LH3 performance - KW_84 - 10-06-19 06:46 PM
Good evening,
I'm curious to hear feedback from any a/c/e/gs series MFD owners who have converted from the LH2 to the LH3 operating system, what are your thoughts on overall performance and in specific applications like Chart and Sonar?
Thank you.
RE: [CA11] Feedback from a/c/e/gs series owners on LH3 performance - Chuck - Raymarine - Moderator - 10-07-19 02:57 PM
Welcome back to the Raymarine Forum KW_84,
Please note of the MFDs which you have listed, a-Series, c-Series, and e-Series MFDs cannot run and will not be permitted to install LightHouse 3 software. LightHouse 3 software may only be installed into Axiom / Axiom Pro / Axiom XL MFDs, eS-Series MFDs, and gS-Series MFDs. Installation of LightHouse 3 software within eS/gS-Series MFDs is typically recommended only within within systems which additionally feature Axiom/Axiom Pro/Axiom XL MFDs. Please additionally note that while LightHouse 3 software will continue to evolve for Axiom / Axiom Pro / Axiom XL MFDs, the last version of LightHouse 3 software which may be used within eS/gS-Series MFDs will likely be LightHouse 3 v3.11.x.