+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Compatibiliy i70s with Seatalk (1) (/showthread.php?tid=9733)
[CA11] Compatibiliy i70s with Seatalk (1) - pitch68 - 10-15-19 01:17 PM
Hello,
I currently have "older" Raymarine products (C90W, ST60+, SPX-30, DSM300,...) that are connected using Seatalk (1).
One of my ST60+ graphik display just died, and I would like to replace it with a newer display. However, I am not ready to upgrade my system to Seatalk ng yet.
I read on this forum that i50/i60 instruments can be connected with Seatalk (1) using a seatalk ng to seatalk (1) adaptor cable and a D244 connector.
I would like to know if this connection is also possible with i70/i70s instruments, and with eSeries or cSeries mfd ?
Thank you for your reply.
Pascal
RE: [CA11] Compatibiliy i70s with Seatalk (1) - Chuck - Raymarine - Moderator - 10-17-19 12:27 PM
pitch68,
Q1a. I read on this forum that i50/i60 instruments can be connected with Seatalk (1) using a seatalk ng to seatalk (1) adaptor cable and a D244 connector. I would like to know if this connection is also possible with i70/i70s instruments.
A1a. Yes
Q1b. and with eSeries or cSeries mfd ?
A1b. Negative