Raymarine forum
[CA] [CA11] EV-1 Transmission speed - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] EV-1 Transmission speed (/showthread.php?tid=9759)

[CA11] EV-1 Transmission speed - MBileckyj - 10-18-19 06:05 PM

Can you please advise the transmission speed of data from the EV-1

I would like to use this to provide heading data to a Furuno radar plotter (RDP149( for target tracking (ARPA), by fitting an ARPA board.
Furuno advise that the min speed required is 25ms


RE: [CA11] EV-1 Transmission speed - Chuck - Raymarine - Moderator - 10-21-19 02:19 PM

Welcome to the Raymarine Forum MBileckyj,

The data update rate for the EV-1, EV-1, and AR200 is 10Hz, which corresponds to an interval rate of 0.1 seconds. I would recommend double checking within Furuno, as an interval rate of 25 milliseconds (0.025 seconds) would require a 40Hz heading update rate. There aren't many offerings in the recreational market supporting 40Hz heading updates.