+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] 3D contours (/showthread.php?tid=9830)
[CA11] 3D contours - Bad Bait Bill - 10-31-19 11:37 AM
I have an A128 and Navionics says it is compatible with their Hot Maps Platinum chart. I'm trying to pull up the 3d shading available for the Georgia coast. I can't figure it out. I have the latest software download, 19.03 and updated the card yesterday. Any suggestions would be appreciated.
RE: [CA11] 3D contours - Chuck - Raymarine - Moderator - 11-07-19 01:38 PM
Welcome to the Raymarine Forum Bad Bait Bill,
A good video on this subject of Navionics Platinum Plus cartography use with a MFD running LightHouse II software may be found here. As indicated within the referenced video, ensure that the Chart View (MENU->PRESENTATION->VIEW & MOTION->CHART VIEW) has been configured to 3D and that 2D Shading (MENU->PRESENTATION->OVERLAYS->2D SHADING) has been configured to ON. 3D Exageration (MENU->PRESENTATION->VIEW & MOTION->3D EXAGERATION) may be adjusted to suit one's needs. Naturally, this feature will have greatest effect within areas having significant bottom slope (steep contour).