+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: [LW] [LW11] Always show vessel names (/showthread.php?tid=9867)
[LW11] Always show vessel names - Ian MacLeod - 11-08-19 10:05 AM
Hi all,
Is there an option to show all vessels by name in chart like you see it when adding a vessel as a buddy In axiom pro ?
Cheers ian
RE: [LW11] Always show vessel names - Louise - Raymarine - Moderator - 11-12-19 05:16 AM
Dear Ian MacLeod,
Thank you for your post.
I am to assume you are operating Lighthouse 3 on an Axiom Pro?
There is no option to have a databox displayed on all AIS targets, you can individually toggle these on by hotspotting the AIS target and toggling the infobox option on.
Many Thanks
Louise
RE: [LW11] Always show vessel names - Ian MacLeod - 11-15-19 01:25 PM
Yes lh3 on axiom pro...so there is no other way ? Upgrading software ?
And also...can i change the color green of ais targets into another color ?
Cheers
RE: [LW11] Always show vessel names - Louise - Raymarine - Moderator - 11-20-19 07:48 AM
Dear Ian MacLeod,
Thank you for the response.
You cannot change the colour of the AIS targets, these are governed by legislation as to the colour and design. We cannot change these.
Many Thanks
Louise