[CA] [CA11] C120 Classic wont boot or update - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [CA] [CA11] C120 Classic wont boot or update (/showthread.php?tid=9933) |
[CA11] C120 Classic wont boot or update - craig86 - 11-17-19 09:59 AM My Raymarine C120 Classic was stuck in boot loop I followed the advice given and tried to update it however it got stuck at 27% I eventually had to turn it off now it hangs at 0% when trying to update. Any advice is appreciated RE: [CA11] C120 Classic wont boot or update - Chuck - Raymarine - Moderator - 11-18-19 01:15 PM Welcome to the Raymarine Forum Craig, It is recommended that any chart card be removed from the MFD's memory card reader and that a Factory Reset be performed to restore operation of the C-Series Classic MFD. The most common cause for a MFD to not accept a software update is due to an incompatible CF memory card. Please click here to view a FAQ addressing recommendations for those seeking to update the software within an A/C/E-Series Classic MFD. |