+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom Pro in a NavPod - Any Overheating Issues? (/showthread.php?tid=9952)
[CA11] Axiom Pro in a NavPod - Any Overheating Issues? - hubesail - 11-19-19 06:56 PM
Hi,
I recently had to replace a fairly new eS127 with an Axiom Pro. This was done with Raymarine help after the eS127 could not be repaired. This unit is in a NavPod and I want to know if there is any reason to think the eS127 problem could have been heat related because of being in the NavPod. Have you heard of any issues with NavPod mounting causing overheating problems?
Thanks, Hube Hopkins
M/V Aurora
RE: [CA11] Axiom Pro in a NavPod - Any Overheating Issues? - Chuck - Raymarine - Moderator - 11-20-19 09:03 AM
Welcome back to the Raymarine Forum Hube,
Q. Have you heard of any issues with NavPod mounting causing overheating problems?
A. Negative.
RE: [CA11] Axiom Pro in a NavPod - Any Overheating Issues? - hubesail - 11-22-19 09:59 AM
Thanks much. Appreciate that.
RE: [CA11] Axiom Pro in a NavPod - Any Overheating Issues? - Chuck - Raymarine - Moderator - 11-22-19 11:46 AM
You're welcome.