Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV-150 to drive ST5000 pump

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-150 to drive ST5000 pump
04-30-20, 10:48 AM (This post was last modified: 04-30-20 12:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
mzuralow Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
[CA11] EV-150 to drive ST5000 pump
Will the EV-150 core pack drive my existing ST5000 plus hydraulic pump. The pump works fine and is already plumbed in so it would avoid the need to re-plumb and bleed the system.
Find all posts by this user
Quote this message in a reply
04-30-20, 12:07 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV-150 to drive ST5000 pump
Welcome to the Raymarine Forum mzuralow,

You will need to examine the currently installed autopilot hydraulic pump to determine whether it is a 12VDC Type 1 Hydraulic Pump. If so, then a T704071 Evolution EV-150 Power Pilot Core Pack may be used with the currently installed autopilot hydraulic pump.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication