European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Autopilots 
/
[TG] [TG11] Raymarine EV pilot and Furuno GP1971 integration
/
[TG] [TG11] Raymarine EV pilot and Furuno GP1971 integration
|
[TG] [TG11] Raymarine EV pilot and Furuno GP1971 integration
|
|
05-26-20, 01:16 AM
(This post was last modified: 05-31-20 11:39 PM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[TG11] Raymarine EV pilot and Furuno GP1971 integration
I want to purchase a Raymarine ev 150and interface it with a furuno gp1971. Can some one tell me all the connectors I would need. Thank you
|
|||
|
|
05-31-20, 11:44 PM
Post: #2
|
|||
|
|||
|
RE: [TG11] Raymarine EV pilot and Furuno GP1971 integration
Hello Briant808,
You'd just need a Devicenet-STNG adaptor cable to connect the Furuno's Devicenet-type NMEA2000 connector into the autopilot's SeatalkNG network. If those are the only two devices in the NMEA2000 system you should have 1 spare socket in the pilot' supplied cabling kit. The adaptor cable is part A06075 and it's 1m long. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)