Component Compatibility

[bradleyj]

I'm considering slowly starting to upgrade my all-analog C120 Classic-based system to digital. Can anyone tell me if my B256 bronze temp/depth transducer and ST600 paddlewheel speed/temp transducer that I currently have hooked up to a DSM250 sounder module via a y-cable will work with a DSM300? Would the DSM300 accept the same Y-cable connector?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum bradleyj,

All transducers, including speed/temp transducers, which were designed for use with a DSM250 may be used with a DSM300 or DSM30. The transducer cable (or in this case y-cable) would simply be unplugged from the DSM250 and then plugged into the DSM300 or DSM30's Transducer socket.