Raymarine forum / Raymarine Forums / Multifunction Displays v / no speed after update

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
no speed after update
08-15-16, 03:17 PM
Post: #1
Dawgs19 Offline
Junior Member
**
 		Posts: 3
Joined: Jun 2016
Reputation: 0
no speed after update
Just updated an e97 to the v17.45. the speed for the boat is not showing up. It worked before but isn't there now. Also what are the options for displaying the speed while having the chart and fishfinder pulled up is it just in the data boxes or can it be displayed somewhere else. Does the internal GPS for the e97 compute the speed?
Find all posts by this user
Quote this message in a reply
08-16-16, 11:51 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: no speed after update
Dawgs19,

The MFD's Databar and/or Databoxes may be customized/configured to display either Speed (through water) or GPS SOG. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication