Raymarine forum / Raymarine Forums / Autopilots v / ST600R

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST600R
09-26-16, 01:06 PM
Post: #1
tjeeagles Offline
Junior Member
**
 		Posts: 11
Joined: Sep 2016
Reputation: 0
ST600R
I think I know the answer but wanted to double check. I'm going to install the new evo 400 on my sailboat and was wondering if there is a way to incorporate the ST600R into the system. Thanks.
Find all posts by this user
Quote this message in a reply
09-26-16, 02:59 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ST600R
Welcome to the Raymarine Forum tjeeagles,

A SeaTalk to SeaTalkng Converter will need to be installed within the SeaTalkng backbone which has been or will be installed to interface the Evolution autopilot components. The ST600R will in turn be interfaced to the SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication