Raymarine forum / Raymarine Forums / Autopilots v / SPX 30 only turns to Starboard

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SPX 30 only turns to Starboard
07-04-17, 03:28 PM
Post: #1
Wainui Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2017
Reputation: 0
SPX 30 only turns to Starboard
Will only turn to starboard.
Ram works in both directions.
Course computer outputs 12v to starboard but 0.5v to port on motor output.
Is there a SoCal repai center?
Find all posts by this user
Quote this message in a reply
07-05-17, 03:32 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: SPX 30 only turns to Starboard
Welcome to the Raymarine Forum Wainui,

As you have implied, the SPX30 autopilot course computer appears to have suffered a failure of its drive motor power circuitry. The SPX30 will need to be shipped to Raymarine’s US Product Repair Center in Nashua, NH to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication