Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA11] Night vision on e95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Night vision on e95
10-24-18, 09:11 AM (This post was last modified: 10-24-18 09:25 AM by Chuck - Raymarine - Moderator.)
Post: #1
daknecht Offline
Junior Member
**
 		Posts: 46
Joined: Mar 2016
Reputation: 0
[CA11] Night vision on e95
I can't find anywhere in my manuals that discusses the use of the e95 chart plotter at night. Can you point me to information on how to change to a night mode?
Find all posts by this user
Quote this message in a reply
10-24-18, 09:28 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Night vision on e95
Welcome back to the Raymarine Forum daknecht,

LightHouse II software and LightHouse 3 software (as of v3.7.70) do not support a night color palette. When operating at night, the backlighting of these MFDs are simply dimmed via Display Brightness setting which may be accessed via the Shortcuts menu (brief press of the Power button).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication