Raymarine forum / Raymarine Forums / Fishfinders v / Dragonfly 4Pro C-map 3D?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dragonfly 4Pro C-map 3D?
05-26-16, 05:38 PM
Post: #1
trackhead Offline
Junior Member
**
 		Posts: 2
Joined: May 2016
Reputation: 0
Dragonfly 4Pro C-map 3D?
I have the Dragonfly 4Pro with C-Map 4D. For the life of me I can't figure out how to view the data on the Dragonfly with the 3D modeling. What am I missing?

Thanks.
Find all posts by this user
Quote this message in a reply
05-27-16, 09:17 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dragonfly 4Pro C-map 3D?
Welcome to the Raymarine Forum trackhead,

Unlike Rayamrine's a/c/e/eS/gS-Series MFDs, Dragonfly displays are designed to function exclusively as 2-D chartplotting devices. Should 3D chartplotting features in conjunction with Navionics Platinum Plus or C-Map 4D cartography be desired in a display featuring internal CHIRP/ClearPulse fishfinder sounder circuitry, then it would be recommended that an ax8 MFD or eSx8 MFD be purchased.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication