[CA] [CA11] converting fsh to Gps

[jimk]

converting fsh to Gpx for my E140W

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jim,

A GPX file containing 2342 waypoints and 1 track has been e-mailed to you. This data was retrieved from your archive.fsh file by a MFD running LightHouse II v13.37 software. The MFD was then commanded to exported by the MFD to the attached GPX file. It should be noted that the waypoint names and/or comments within your archive.fsh file and the subsequently produced GPX file … most notably with regard to the inclusion of apostrophes within the waypoint names. As indicated, a FAQ has been written address the constraints for waypoint names and comments. This FAQ may be found here. To prevent any future issues related to these constraints when using a Raymarine MFD or third party chartplotting product / software, it is recommended that the naming constraints within the referenced FAQ be heeded and that the names of your waypoints be changed to comply with these constraints