Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Raymarine autopilot P70S in "locked" heading

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine autopilot P70S in "locked" heading
03-29-20, 11:30 AM (This post was last modified: 03-30-20 01:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
gabriel Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2020
Reputation: 0
[CA11] Raymarine autopilot P70S in "locked" heading
I purchased a 1996 Hunter 376. It has the original rotary drive type 1 and a newer Raymarine P 70S.
When I turned on the controller, the heading was 59deg.
I reset it to factory settings, and now it shows 64 deg (while the true compass setting is 120 deg).
I engaged the controller while motoring and it engages the steering wheel, but it senses no change in direction, and it makes no adjustments.
When I add or subtract 10 deg, the rotary drive complies and it changes course.
Everything seems to be working except the compass sensor in the controller.
Any ideas on how to fix this?
Thanks,
Gabriel
Find all posts by this user
Quote this message in a reply
03-30-20, 01:23 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Raymarine autopilot P70S in "locked" heading
Welcome to the Raymarine Forum Gabriel,

What model of autopilot course computer is installed onboard the vessel?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication