Raymarine forum / Raymarine Forums / Radar v / Quantum radar with a series

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Quantum radar with a series
08-10-16, 08:43 AM
Post: #1
rube740 Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
Quantum radar with a series
Hello. My radar works fine and I have it connected directly to 12v power. The problem is, is that I have to disconnect the fuse everytime I repower my GPS in order to get the radar to work again. Is this because it is a must to have a switch? Or can I bypass this some way?
Find all posts by this user
Quote this message in a reply
08-13-16, 03:40 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Quantum radar with a series
Welcome to the Raymarine Forum rube740,

It is recommended that all currently manufactured Raymarine radomes and open array pedestals be powered from a switched 12V power circuit. One should not simply connect the radome or open array pedestal to the battery or bus bar to supply it with power.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication