Raymarine forum / Raymarine Forums / Autopilots v / Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o
10-23-17, 02:53 PM
Post: #1
Bill Shepherd Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2016
Reputation: 0
Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o
I am installing an EV-100 wheel pilot on to my Seatalk backbone for use with my e127 MFD. I have an Airmar heading sensor installed about 5 years ago. It looks like the EV1 sensor core should replace the Airmar, but I want to confirm.
Find all posts by this user
Quote this message in a reply
10-23-17, 03:19 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Does EV1 sensor replace, or compliment Airmar heading sensor when installing EV-10o
Welcome to the Raymarine Forum Bill,

The EV-1/2 combines the functions of course computer and heading sensor within a single component. Evolution autopilots will exclusively accept heading data from the system's EV-1 or EV2 CCU.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication