Raymarine forum / Raymarine Forums / General Discussions v / mast connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mast connection
11-06-17, 03:03 PM
Post: #1
David Fletcher Offline
Junior Member
**
 		Posts: 23
Joined: May 2017
Reputation: 0
mast connection
Would you have an suggestions on a quality method to have a raynet to raynet radar connection at the base of a deck stepped mast.

If one was to use a Radar cable with the 12 volt power connectors as the first cable do the extension cables need to be radar cables or can one use any raynet cable?

I am looking for a weather proof connection at the deck of my sailboat.


David
Find all posts by this user
Quote this message in a reply
11-06-17, 03:43 PM (This post was last modified: 11-06-17 03:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: mast connection
Welcome to the Raymarine Forum David,

Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, it would be recommended that a Digital Radar Extension Cable be installed from the radome to the base of the mast.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication