Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] How to update p70s to v3.08?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to update p70s to v3.08?
06-03-19, 02:36 PM (This post was last modified: 06-04-19 11:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
scarlsen Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[CA11] How to update p70s to v3.08?
Hi
I am the happy owner of an autopilot build by EV-1,ECU100, and p70s (v3.07).
I have connected it to my Garmin 526, and can see that p70s show the navigation data from the GPS. But I cannot activate “track mode”, it keeps show the messages “Turn to waypoint ?” [yes][no] after 2-5 sec – over and over again.
I found the FAQ: http://forum.raymarine.com/showthread.php?tid=3007 that says that the problem can be fixed after update to v3.08. And now comes my question.. How do I update the software ? I only have a EV-1, ECU100, s70s and a Garmin GPS.

Br.
Per
Find all posts by this user
Quote this message in a reply
06-04-19, 11:54 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] How to update p70s to v3.08?
Welcome to the Raymarine Forum scarlsen,

Please click here to view a FAQ addressing how one may update the software within Raymarine products when the system lacks a compatible Raymarie MFD though which updates may be served.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication