Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Tiller Pilot Extension rods - st1000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Tiller Pilot Extension rods - st1000
08-05-19, 05:11 PM (This post was last modified: 08-07-19 10:39 AM by Chuck - Raymarine - Moderator.)
Post: #1
cmackg Offline
Junior Member
**
 		Posts: 3
Joined: May 2019
Reputation: 0
[CA11] Tiller Pilot Extension rods - st1000
The manual doesn't mention a limit on length -- it appears my boat needs 9 inches of extensiontubes to reach the cockpit wall. Is there any problem with adding a 6 & 3 in tube? Or a 5 & 4?
Find all posts by this user
Quote this message in a reply
08-07-19, 12:10 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Tiller Pilot Extension rods - st1000
Welcome to the Raymarine Forum cmackg,

The maximum recommended total length for a tiller pilot push rod extension is 10". Raymarine offers 1", 2", 3", 4", 5", and 6" tiller pilot push rod extensions (D003, D004, D005, D006, D007, and D008 respectively) to support this end. In this case, your suggestions to add 6" & 3" extensions or 5" & 4" extensions may indeed be used to create the additional length required.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication