[TG] ST6001 to P70R

[r207]

Just to confirm as there seems to be so much information about changing the heads on the autopilot.

I Currently have a ST6001 and want to change it to the P70rs that i have purchased

Do i only need the D244 SeaTalk Junction Block plugged into the A22164 1m Adapter Cable.

What else is needed for this or is that all

thanks

R

[Tom - Raymarine - Moderator]

Hello R,

A22164 has been phased out (use A06073 instead, same connectors and length), but other than that you are spot on. That will work fine.

Tom