Raymarine forum / Raymarine Forums / Instruments v / Is an i70 Multifunction Instrument Display required when using an iTC-5?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is an i70 Multifunction Instrument Display required when using an iTC-5?
08-09-16, 10:17 AM (This post was last modified: 01-10-17 04:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Is an i70 Multifunction Instrument Display required when using an iTC-5?
Is an i70 Multifunction Instrument Display required when using an iTC-5?

When an analog instrument has been interfaced to an iTC-5 Analog Instrument Transducer Converter or instrument pod(s), it is necessary that the SeaTalkng/NMEA 2000 backbone to additionally include an i70 or ST70 Multifunction Instrument Display. Raymarine Multifuction Displays (ex. A/C/E-Series Classic MFDs, C/E-Series Widescreen MFDs, a/c/e/eS/gS-Series MFDs, etc.) are not designed to support mastership of instruments to include the calibration, offsets, alarms, etc. associated with instrument transducers. It is the function of the i70 and ST70 MFIDs to support these functions.

RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication