Raymarine forum / Raymarine Forums / Instruments v / No temperature data from ITC-5/DST-800

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No temperature data from ITC-5/DST-800
08-01-16, 09:22 AM
Post: #1
Labratdeb Offline
Junior Member
**
 		Posts: 2
Joined: Jul 2016
Reputation: 0
No temperature data from ITC-5/DST-800
I have a DST-800 connected to the network through an ITC-5. The speed and depth work fine, but there is no temperature data being transmitted to the eS78 and i70 displays. Also, the tridata screen on the i70 is not an option (presumably due to lack of temperature data. All components are newly installed. I've checked the wiring and it is correct and sound. How can I troubleshoot this problem?
Find all posts by this user
Quote this message in a reply
08-31-16, 02:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: No temperature data from ITC-5/DST-800
Welcome to the Raymarine Forum Labratdeb,

As temperature and speed a linked, have you configured the speed data source via the i70 MFID? If so, is the Sea Temp data item reporting -.- for its value?
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication