Raymarine forum / Raymarine Forums / Multifunction Displays v / E-120 Version 5.69

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E-120 Version 5.69
09-06-16, 08:01 PM
Post: #1
Captain Rick Offline
Junior Member
**
 		Posts: 14
Joined: Feb 2016
Reputation: 0
E-120 Version 5.69
I recently downloaded a Navionics cartography update. Part of that update were sonar charts. How do I display these charts on the E-120? Thanks
Find all posts by this user
Quote this message in a reply
09-13-16, 03:21 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E-120 Version 5.69
Welcome to the Raymarine Forum Rick,

Within the E-Series Classic MFD's Chart application page/pane, one my switch between Navionics Nautical Charts and Sonar Charts via the command sequence PRESENTATION->CHART LAYERS->CHART TYPE->FISH (Sonar Charts) / NAV (Nautical Charts).
Find all posts by this user
Quote this message in a reply
10-28-16, 01:07 PM (This post was last modified: 10-28-16 01:42 PM by Chuck - Raymarine - Moderator.)
Post: #3
Captain Rick Offline
Junior Member
**
 		Posts: 14
Joined: Feb 2016
Reputation: 0
RE: E-120 Version 5.69
Thanks Chuck!!
Find all posts by this user
Quote this message in a reply
10-28-16, 01:42 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: E-120 Version 5.69
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication