European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
/
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
|
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
|
|
04-11-17, 07:48 AM
(This post was last modified: 04-11-17 07:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNe
Adapting Ethernet cable to mate to an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch
Should the Ethernet communications cable which has been interfaced compatible Raymarine product, compatible FLIR thermal camera, Fusion 700/750 Series stereo head unit or compatible IP camera be terminated with a RJ45 (M) plug, then the cable may be adapted (using an A80247 RJ45 (F) to RayNet (F) Adapter) to be mated to the Ethernet NETWORK socket of an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch. Should the Ethernet communications cable which has been interfaced compatible Raymarine product, compatible FLIR thermal camera, Fusion 700/750 Series stereo head unit or compatible IP camera be terminated with a SeaTalkhs (M) plug, then the cable may be adapted (using an A80160 SeaTalkhs (F) to RayNet (F) Adapter) to be mated to the Ethernet NETWORK socket of an Axiom MFD, a/c/e/eS/gS-Series MFD, or HS5 RayNet Network Switch. RAYFAQ# |
|||
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)