Raymarine forum / Raymarine Forums / Multifunction Displays v / Seatalkng power cord color coding

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalkng power cord color coding
04-15-17, 09:15 PM
Post: #1
Tim22 Offline
Junior Member
**
 		Posts: 6
Joined: May 2016
Reputation: 0
Seatalkng power cord color coding
I am installing a seatalkng backbone. The red power supply cable has a spur connector on one end and red, black, and uninsulated wire at the other. I presume the red is positive, black is negative. Could you tell me what the unshielded wire is for and what it should be connected to.

Thanks
Tim
Find all posts by this user
Quote this message in a reply
04-18-17, 01:08 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Seatalkng power cord color coding
Welcome to the Raymarine Forum Tim,

The bare wire which you have referenced is the SeaTalkng Power Cable's drain lead. Please click [http://forum.raymarine.com/showthread.php?tid=316]here[/url] to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication