Raymarine forum / Raymarine Forums / Product Selection Assistance v / AIS Transceiver for E90W Plotter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS Transceiver for E90W Plotter
04-30-17, 10:06 PM
Post: #1
viben Offline
Junior Member
**
 		Posts: 27
Joined: Mar 2017
Reputation: 0
AIS Transceiver for E90W Plotter
If I get the Raymarine AIS650 Transceiver, will it work with my E90W plotter?

Does it need to connect to my VHF radio (Icom)?

If not, can it share the masthead VHF antenna I already have for the radio?
Find all posts by this user
Quote this message in a reply
05-01-17, 04:00 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: AIS Transceiver for E90W Plotter
Welcome to the Raymarine Forum viben,

The AIS650 may indeed be interfaced to an E-Series Widescreen MFD. It is generally recommended that SeaTalkng communications protocol be used to interface these products to one another. Should you not desire to install a second VHF antenna, then a Class B AIS Antenna Splitter (ex. AIS100) may be used. Should the VHF radio have a NMEA 0183 communications interface, then it should remain interfaced to the NMEA 0183 leads of the MFD's Power/Data/Video Input Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication