Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Clearing MOB waypoint from a C80.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Clearing MOB waypoint from a C80.
12-09-17, 04:50 PM (This post was last modified: 12-11-17 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
sailorskip Offline
Junior Member
**
 		Posts: 2
Joined: Nov 2016
Reputation: 0
[CA] Clearing MOB waypoint from a C80.
There is a MOB (man overboard) waypoint on my C80 (classic). The reference manual states that it must be cleared in order to return to normal operation. It does not show up, that I can see, on the waypoint list.

How can I remove the MOB waypoint?

Thank you.
Find all posts by this user
Quote this message in a reply
12-11-17, 11:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Clearing MOB waypoint from a C80.
Welcome to the Raymarine Forum Skip,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication